HP Matrix Operating Environment 7.2 Infrastructure Orchestration User Guide

Subnet2 is associated with VmHost2 and no others.
Based on subnet allocation criteria, Subnet1 is the best choice for LogicalSubnetA.
However, if VmHost1 is unsuitable for the LogicalServerGroups associated with LogicalSubnetA,
the reservation will fail without Subnet2 being evaluated. VmHost1 might be unsuitable because it
is not recoverable or it has an insufficient number of processors, in which case the following server
reservation error message would appear;
"Reservation failed for logical server SvrGrp1-1. Unable to find a
virtual server with the following requirements: Recoverable. 3
processor(s)."
To resolve this issue, narrow the network selection options, eliminating general specifications (“Any”
options) from the network selection attributes. If removing all general options does not select the
Action
correct network, specify the network by name or select fewer server pools and resources when
submitting the request.
Could not find a provisioned infrastructure service with the specified logical server in Matrix
infrastructure orchestration
From the Matrix OE logical server perspective, clicking on the Manage this logical server with
Matrix infrastructure orchestration icon displays the following message: Could not find a
Failure message
provisioned infrastructure service with the specified logical server in
Matrix infrastructure orchestration. If a physical server was selected
and the infrastructure service was provisioned by infrastructure
orchestration, check if its status is not standby.
The logical server had been deactivated.Possible cause
Action
• If it is not a “clean-me” logical server then return to infrastructure orchestration and issue an
Activate servers request for the logical server.
• If it is a “clean-me” logical server then perform a manual clean-up process for the logical server.
See “Manual clean-up process (physical)” (page 207).
Adding servers to services
Add data disk request fails
Add data disk request fails.Issue
Server deactivatedPossible cause
This error might occur if attempting to add a data disk for logical servers that are deactivated. To
continue to add the data disk, initiate an Activate servers request, and after restoring the service,
add the disks to the Logical Server Group.
Action
192 Troubleshooting