HP Insight Global Workload Manager 6.2 User Guide

c. Verify that /etc/hosts has the same name configured for the address. Note that the
first name should be the fully qualified domain name, and any aliases are listed
afterward.
[mysystem#3] > grep 15.11.100.17 /etc/hosts
15.11.100.17 mysystem.mydomain.com mysystem
d. Verify that the reverse lookup of the IP address returns the same fully qualified domain
name as configured in /etc/hosts.
[mysystem#4] > nslookup 15.11.100.17
Trying DNS
Name: mysystem.mydomain.com
Address: 15.11.100.17
Fix any issues by editing /etc/hosts or for additional information, see:
• The HP-UX IP Address and Client Management Administrator's Guide, available online at http://
www.hp.com/go/bizsupport.
• The BIND 9 Administrator Reference Manual, available from the Internet Systems Consortium
at http://www.isc.org/sw/bind/arm93.
• The Windows documentation.
Unable to create new native thread
A message containing the following text might be displayed:
... unable to create new native thread
Workaround This problem occurs because the following kernel parameters are set too low:
• max_thread_proc
Set max_thread_proc to at least 256.
• nkthread
Set nkthread to allow for your max_thread_proc value as well as the number of threads
needed by all the other processes on the system.
Unable to create new native thread 49