HP LineJet Printers - Quick Reference Guide, 171248-001PX

81
Cleaning The Printer
1.
Power off the printer and unplug the power cord.
2. Unload the paper supply (page 52).
3. Remove the ribbon (page 54).
4. Using a soft-bristled, non-metallic brush, remove dust particles
from the paper path, ribbon guides, and ribbon path. Refer to
the ribbon path diagram on the shuttle cover.
5. Brush and vacuum accumulated dust or residue, especially in
the tractor and base pan areas, and around the exterior of the
hammer bank.
6. Wipe the splined shaft with a soft cloth.
7. Using a cloth dampened with anhydrous alcohol (no water),
clean the ribbon guides. Do not let alcohol drip into the hammer
bank.
Hammer Bank
(hidden)
Splined Shaft
Ribbon Path Diagram
Ribbon Guide
Base Pan