HP LineJet Printers - QMS Code V Technical Reference Manual, 171251-001PX

Chapter 2 Command Codes

Extended Graphics Commands

Specific graphics functions (lines, boxes, alphanumerics, forms, bar codes,

reverse printing, etc.) are available through commands sent as part of an

extended graphics command sequence. Table 3 summarizes the extended

graphics commands, which are fully described on the referenced pages.

Extended commands must be used as part of an alphanumeric command

sequence (after the Code V is in the Graphics Mode). In some cases, the

actual command may have a different meaning and perform a different

function when used within an extended graphics command sequence

compared to its use as a standard graphics command.

An alphanumeric command from Table 1 must be used before issuing an

Extended Graphics Command.

Table 3. Extended Graphics Commands

Command Description Page #

IBARC, Bar Code (Version II) Ch. 3

B Bar Code, Horizontal Ch. 3

C Bar Code, Vertical Ch. 3

LB Boxes 31

H Character Height 33

W Character Width 35

in Character Set Selection Ch. 5

KF Dark Print 40

D Descending Characters 42

IREPH, Duplication, Horizontal (Version II) 47

IREPV, Duplication, Vertical (Version II) 52

IFONT,S, Font, Selecting Default (Version II) 67

Font Fonts, Rotatable 68

S Fonts, Compressed Print Density 71

LF Forms Construction 75

IFORM,C Forms, Creating Dynamic (Version II) 77

IFORM,D Forms, Deleting Dynamic (Version II) 78

IFORM,E Forms, Executing Dynamic (Version II) 78

IFORM,L Forms, Listing Dynamic (Version II) 79

IFORM,R Forms, Resetting Dynamic (Version II) 83