HP LineJet Printers - QMS Code V Technical Reference Manual, 171251-001PX

Chapter 2 Command Codes

Standard Graphics Commands

Standard graphics commands can be used any time the Code V is in the

Graphics Mode. They set internal control values or are sent directly to the

printer for processing. Standard graphics commands are summarized in

Table 2 and fully described on the referenced pages.

Note The Graphics Mode (Table 1) must be enabled before

issuing a Standard Graphics command.

Table 2. Standard Graphics Commands

Command Description Page #

- Carriage Return 33

@C Character Type 36

#x Compressed Print 38

! Direct Printer Command, Hex 01 44

" Direct Printer Command, Hex 02 44

# Direct Printer Command, Hex 03 44

$ Direct Printer Command, Hex 04 44

% Direct Printer Command, Hex 05 44

& Direct Printer Command, Hex 06 44

’ Direct Printer Command, Hex 07 44

( Direct Printer Command, Hex 08 44

. Direct Printer Command, Hex 0E 44

/ Direct Printer Command, Hex 0F 44

D Dot Slew 45

S Duplication, Horizontal 45

IREPH, Duplication, Horizontal (Version II) 47

R Duplication, Vertical 48

Y Auto-Increment/Decrement Vertical Duplication 50

IREPV, Duplication, Vertical (Version II) 52

B Dynamic Form 54

[ or { Dynamic Form, Field Length 56

C Dynamic Form, Copy Fields 58