HP LineJet Printers - PCL-II/LinePrinter Plus Technical Reference Manual, 171249-001PX

98
Chapter 3 Configuring the P-Series Emulation with Control Codes
Form Feed
ASCII Code FF
Hex Code 0C
Dec Code 12
Purpose Prints the data in the buffer, advances the paper position to the
next top-of-form and moves the character position to the first
character column.
Discussion The default forms length is determined by the printer
configuration. Forms length is set by using the control panel or
forms length control codes. Code FF cancels all single-line only
print attributes.
The default form length is 11 inches. The Form Feed command
will react differently when the VFU is active. Refer to Chapter 7.