HP LineJet Printers - PCL-II/LinePrinter Plus Technical Reference Manual, 171249-001PX

Condensed Print Reset
169
Condensed Print Reset
ASCII Code DC2
Hex Code 12
Dec Code 18
Purpose Cancels the condensed print mode set by SI, ESC SI, or the
control panel.
Discussion This returns the printer to the font that was active before
condensed print occurred. Other print attributes are not affected.
Example See the Condensed Print control code (page 168) for an
example of Condensed Print Reset.
Cut-Sheet / Paper Feed Control
ASCII Code ESC EM n
Hex Code 1B 19 n
Dec Code 27 25 n
Purpose This code controls the paper feed mechanism on Epson printers.
†
Discussion The printer ignores this command.
Define a Download Character
ASCII Code ESC &
Hex Code 1B 26
Dec Code 27 38
Purpose Defines a download character.
†
Discussion The printer ignores this command and removes all downloaded
font data from the data stream.
Delete Character
ASCII Code DEL
Hex Code 7F
Dec Code 127
Purpose Deletes the previous character on a line.
Discussion This command is ignored if it occurs immediately after a CR or a
paper motion command. Characters truncated due to line length
restrictions are not affected by this code.