HP LineJet Printers - PCL-II/LinePrinter Plus Technical Reference Manual, 171249-001PX

138

Chapter 4 Configuring the Proprinter III XL Emulation with Control Codes

Line Feed

ASCII Code LF

Hex Code 0A

Dec Code 10

Purpose Prints the data in the buffer (if any) and advances the paper one

line at the current line space setting.

Discussion If configured for LF equals new line (LF = CR + LF), the logical

print head is positioned at character column 1 of the new line.

Otherwise, the logical print head does not move when

configured for LF function only (LF = LF only). The LF function

cancels double wide (expanded) characters if set by the SO

command.

Line feed can occur at any place in the datastream and is acted

upon immediately.

Table 31.

Values

Bit Function OFF (0) ON (1)

7 Process this byte Process Ignore

6 Code page 437 850

5 Unidirectional

Printing

Bidirectional Unidirectional

4 12 cpi compressed

to 20

20 12

3 n/a n/a n/a

2 Form feed at TOF Enable Ignore

1 Print Width 13.2 inches 8 inches

0 Sheet feeder n/a n/a