HP LineJet Printers - Printer Manager User's Guide, 170988-001PX

Printer Setup

Your printer uses the diagnostic port to communicate with the printer

manager. The diagnostic port must be configured to interact with the

Ethernet interface. Follow the instructions below to check the diagnostic

port setting.

1. On the printer control panel, press the ON LINE key to take the printer

off line.

2. Press the UP (↑) and DOWN (↓) keys at the same time to unlock the

ENTER key.

3. Enter the Factory Menu by pressing the ↓, ↑, ← and → keys at the

same time.

4. The PRINTER MGMT menu appears. Press the ↓ key until the

“Diagnostic Port” option displays. (If the “Debug Ethernet” option is

already marked with an asterisk (*), there is no action needed. Skip to

step 6.)

5. Press the → key until the “Debug Ethernet” option appears. Press

ENTER to select this option.

6. Press the UP (↑) and DOWN (↓) keys at the same time to lock the

ENTER key.

7. Press the ON LINE key to put the printer back on line.