HP LineJet Printers - PCL-II/LinePrinter Plus Technical Reference Manual, 171249-001PX

Emphasized Print Reset

ASCII Code SFCC F

Hex Code SFCC 46

Dec Code SFCC 70

Purpose Resets emphasized character printing.

Discussion The emphasized print reset control code only resets the

emphasized print character attribute.

Example See the Emphasized Print control code example for an example

of Emphasized Print Reset.

Emulation Reset

ASCII Code SFCC @

Hex Code SFCC 40

Dec Code SFCC 64

Purpose Initializes all print mode related parameters to their factory

default or power-up configuration values.

Discussion Print mode, line spacing, international language selection,

margins, form length, skip-over perforation, and character pitch

are reset to their selected power-up configuration values.

Character-by-character and line-by-line attributes are canceled.

The vertical format unit is cleared. The current line is set to the

top-of-form position. Interface parameters and printer protocol

selection are not affected.

If the menu option “Reset Cmd CFG Ld” is disabled, the factory

default configuration is loaded. If it is enabled, the power-up

configuration is used. The default is the factory default.