- Hewlett-Packard Printer User Manual

Set the Auto Power Down delay (touchscreen control panel)
NOTE: This section applies to the HP LaserJet Pro 200 color M251nw Printer model only.
1.
From the Home screen on the product control panel, touch the Setup
button.
2. Open the following menus:
●
System Setup
●
Energy Settings
●
Auto Power Down
●
Auto-Off Delay
3. Select the time for the power-down delay.
NOTE: The default value is 30 Minutes.
4. The product automatically wakes from the auto power-down mode when it receives jobs or when
you press a button on the control panel. You can change which events cause the product to wake.
Open the following menus:
●
System Setup
●
Energy Settings
●
Auto Power Down
●
Wake Events
To turn off a wake event, select the event and then select the No option.
ENWW
Economy settings
69