- Hewlett-Packard Printer User Manual

Chapter 5 Problem Solving 240
Correcting Output Quality Problems
Job went to a different
bin than was expected.
The wrong size or type of paper was used for the job. (See
page 330
for supported paper sizes.)
Job prints on the wrong
side of the paper.
z Make sure you have loaded the paper correctly. (Starting on
page 84
.)
z If you are printing one-sided copies, load paper into Tray 1
with the side to be printed facing up. Load paper into Trays
2, 3, and the 2000-sheet Input Tray with the side to be
printed facing down.
z If you are printing two-sided copies, load paper into Tray 1
with the first side to be printed facing down. Load paper into
Trays 2, 3, and the 2000-sheet Input Tray with the first side
to be printed facing up.
Printer Ignores Font, Format, or Tray/Bin Selection (continued)
Situation Solution