HP LaserJet P4010 and P4510 Series - User Guide
Table Of Contents
- Product basics
- Control panel
- Software for Windows
- Supported operating systems for Windows
- Supported printer drivers for Windows
- HP Universal Print Driver (UPD)
- Select the correct printer driver for Windows
- Priority for print settings
- Change printer-driver settings for Windows
- Software installation types for Windows
- Remove software for Windows
- Supported utilities for Windows
- Software for other operating systems
- Use the product with Macintosh
- Software for Macintosh
- Use features in the Macintosh printer driver
- Connectivity
- Paper and print media
- Use product features
- Print tasks
- Manage and maintain the product
- Print the information and show-me-how pages
- Use the HP Easy Printer Care software
- Use the embedded Web server
- Use HP Web Jetadmin software
- Use security features
- Manage supplies
- Replace supplies and parts
- Install memory, internal USB devices, and external print server cards
- Clean the product
- Upgrade the firmware
- Solve problems
- Solve general problems
- Restore factory settings
- Interpret control-panel messages
- Jams
- Solve print-quality problems
- Solve performance problems
- Solve connectivity problems
- Solve common Windows problems
- Solve common Macintosh problems
- Solve Linux problems
- Supplies and accessories
- Service and support
- Specifications
- Regulatory information
- FCC regulations
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Return and recycling instructions
- Paper
- Material restrictions
- Disposal of waste equipment by users in private households in the European Union
- Chemical substances
- Material Safety Data Sheet (MSDS)
- For more information
- Declaration of conformity
- Safety statements
- Index
4. Press the down arrow to highlight SLEEP MODE, and then press OK.
5. Press the up arrow
or the down arrow to select ON or OFF, and then press OK.
6.
Press Menu
.
Wake time
The wake time feature allows you to instruct the product to wake at a certain time on selected days, to
eliminate waiting for the warm-up and calibration periods. You must have SLEEP MODE on to set the
wake time.
Set the wake time
1.
Press Menu
.
2. Press the down arrow
to highlight CONFIGURE DEVICE, and then press OK.
3. Press the down arrow
to highlight SYSTEM SETUP, and then press OK.
4. Press the down arrow
to highlight WAKE TIME, and then press OK.
5. Press the up arrow
or the down arrow to select the day of the week, and then press OK.
6. Press the down arrow
to select CUSTOM, and then press OK.
7. Use the numeric keypad, or press the up arrow
or the down arrow to select the hour, and then
press OK.
8. Use the numeric keypad, or press the up arrow
or the down arrow to select the minutes, and
then press OK.
9. Press the up arrow
or the down arrow to select AM or PM, and then press OK.
10. Press OK to select APPLY TO ALL DAYS.
11. Press the up arrow
or the down arrow to select YES or NO, and then press OK.
12. If you select NO, press the up arrow
or the down arrow to set the WAKE TIME for the other
days of the week, and then press OK to accept each selection.
13.
Press Menu
.
ENWW Economy settings 91