HP LaserJet P4010 and P4510 Series - Software Technical Reference

Tray or bin Paper type Specifications Quantity
Optional envelope feeder Envelopes
Less than 60 g/m
2
(16 lb) bond to
90 g/m
2
(24 lb) bond
Up to 75 envelopes
Standard top bin Paper
Up to 500 sheets of 75 g/m
2
(20
lb) bond
Rear bin Paper
Up to 100 sheets of 75 g/m
2
(20
lb) bond
Optional duplexer Paper Range:
60 g/m
2
(16 lb) bond to 120 g/m
2
(32 lb) bond
Optional stacker Paper
Up to 500 sheets of 75 g/m
2
(20
lb) bond
Optional stapler/stacker Paper Stapling: Up to 20 print jobs of up
to 15 pages each
Stacking: Up to 500 sheets of 75
g/m
2
(20 lb) bond
Optional 5-bin mailbox Paper
Up to 500 sheets of 75 g/m
2
(20
lb) bond
Paper source:
The Paper source: setting specifies the source tray to use for printing a document. The list of source
trays depends on the printer accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Paper source: drop-down menu can contain the following options:
●
Automatically Select
●
Printer auto select
●
Manual Feed in Tray 1
●
Tray 1
●
Tray 2
●
Tray 3
●
Tray 4
●
Tray 5
●
Tray 6
The default setting is Automatically Select. When this is selected, the HP LaserJet P4010 and P4510
Series printer uses the source tray that supports the selected media size. For the other options, make
sure the correct media size is loaded in the source tray.
138 Chapter 4 HP PCL 5, PCL 6, and PS emulation drivers for Windows ENWW