HP LaserJet P4010 and P4510 Series Printers PCL 6 - Printing

HP LaserJet P4010 and P4510 Series Printers PCL 6 – Printing
©2008 Copyright Hewlett-Packard
Development Company, L.P.
7
www.hp.com
To perform the following tasks, open the printer driver and click the
Advanced tab.
How do I Steps to perform
32 Select advanced printing options In any of the sections, click a current setting to activate a
dropdown list so you can change the setting.
33 Change the number of copies that
are printed
NOTE: If the software program that
you are using does not provide a
way to print a particular number of
copies, you can change the number
of copies in the driver.
Changing this setting affects the
number of copies for all print jobs.
After your job has printed, restore
this setting to the original value.
Open the Paper/Output
section, and then enter the
number of copies to print. If you select 2 or more copies,
you can select the option to collate the pages.
34 Load letterhead or preprinted paper
the same way for every job,
whether printing on one or both
sides of the page
a) Open the Document Options
section, and then open
the Printer Features
section. b) In the Alternative
Letterhead Mode
drop-down list, select
On. c) At the
product, load the paper the same way you would for
printing on both sides.
35 Change the order in which pages
are printed
a) Open the Document Options
section, and then open
the Layout Options section. b) In the
Page Order
drop-
down list, select
Front to Back
to print the pages in the
same order as they are in the document, or select
Back
to Front
to print the pages in the reverse order.
32
33
34
35