HP LaserJet P4010 and P4510 Series - Software Technical Reference

Resolution Enhancement technology (REt)
The REt feature is Enabled by default. Resolution Enhancement technology (REt) refines the print
quality of characters by smoothing jagged edges that can occur on angles and curves of a printed image.
Select Disabled if graphics, particularly scanned images, are not printing clearly.
Raster Compression (PCL 6 only)
Use the Raster Compression feature to select the graphics compression method:
Automatic. The software determines the best compression method to use.
Best Quality. Forces the software to use a lossless compression method. (Lossless means that
no data is lost during compression.)
Maximum Compression. Where applicable, requires the software to always use a lossy
compression method (some data is lost). Choosing this option increases the print speed
performance, but does decrease print image quality.
Alternative Letterhead Mode
When selected, this option eliminates the need to flip or reload letterhead or preprinted paper in a tray,
whether printing on one or both sides of the sheet. Load the paper the same as for printing on both
sides. If the printer tray has an icon that indicates whether to load paper either face-up or face-down,
load the paper in opposite orientation of that shown.
When this option is selected, use one of the following options in the Type is setting:
Letterhead
Preprinted
Layout Options
The Layout Options setting offers different ways of setting up the Page Order.
Front to Back. Prints the document so that page 1 prints first.
Back to Front. Prints the document so that page 1 prints last; useful to achieve output in the correct
order when printing to a face-up page output bin.
NOTE: The page-ordering operation works on whole sheets of paper rather than on individual logical
pages. Accordingly, if by setting Pages per Sheet (on the Finishing tab) to be greater than one, the
ordering of logical pages on a physical sheet of paper does not change.
ENWW Advanced tab features 125
HP PCL 5, PCL 6, and PS
emulation drivers for
Windows