HP LaserJet P3005 - User Guide

Control panel message Description Recommended action
21 PAGE TOO COMPLEX
alternates with
To continue press
The page-compression process is too slow
for the device. Some data may be lost on the
page.
●
Press
to see step-by-step
information.
●
To print the job with some data loss,
press
to exit the message, and then
press
. If data is lost, simplify the
page content to reduce its complexity.
●
To exit, press
.
22-EIO X BUFFER OVERFLOW
alternates with
To continue press
For devices with an EIO device only.
The device EIO card in slot X has overflowed
its I/O buffer during a busy state.
●
Press
to continue printing.
NOTE Data will be lost.
●
If the message persists, contact
HP Support.
22-EMBEDDED I/O BUFFER OVERFLOW The embedded HP Jetdirect print server
buffer has overflowed during a busy state.
●
Press
to continue printing.
NOTE A loss of data will
occur.
●
If the message persists, contact
HP Support.
22-PARALLEL I/O BUFFER OVERFLOW
alternates with
To continue press
The device parallel buffer has overflowed
during a busy state.
●
Press
to continue printing.
NOTE Data will be lost.
●
If the message persists after exiting
Help, contact HP Support.
22-SERIAL I/O BUFFER OVERFLOW
alternates with
To continue press
The device serial buffer has overflowed
during a busy state.
●
Press
to continue printing.
NOTE Data will be lost.
●
If the message persists, contact
HP Support.
22-USB I/O BUFFER OVERFLOW
alternates with
To continue press
The device's USB buffer has overflowed
during a busy state.
●
Press
to continue printing.
NOTE Data will be lost.
●
If the message persists, contact
HP Support.
40 BAD SERIAL TRANSMISSION
alternates with
To continue press
A serial data error (parity, framing, or line
overrun) has occurred while the device was
receiving data.
●
Press
to continue printing.
NOTE Data will be lost.
●
If the message persists, contact
HP Support.
ENWW Control-panel messages 115