HP LaserJet P3005 - Software Technical Reference

Figure 6-64 HP EWS – AutoSend screen
Turn on the AutoSend feature
Use the following procedure to make the AutoSend feature available.
1. Make outgoing e-mail functions available by following the instructions that are listed in this chapter.
(For more information, see
E-mail Server on page 330.)
2. Select the Enable AutoSend check box.
3. Click an option to specify the interval at which you want the product to send the product-
configuration and supplies-usage information to the e-mail recipients (determined in the next step),
and then type the number of days, weeks, months, or pages printed.
4. Configure up to 20 destinations using the format that appears on the screen.
5. To send device configuration and supplies status information to HP, select the Send to HP check
box.
6. Click Apply.
Security
The Security screen is shown in the following figure.
ENWW HP Embedded Web Server (EWS) 333
Macintosh