HP LaserJet P3005 - Software Technical Reference

4. Click Add to open the add printer screen.
Figure 6-22 Add printer screen
5. Choose the network connection protocol in the top drop-down menu. The two supported protocols
are Rendezvous and IP Printing.
If you are using Rendezvous, carry out the following step:
NOTE Rendezvous is the easiest method and is the best method to use if the device is
installed on your local network.
IP Printing must be used if you are installing the device on a different network.
If you are using Rendezvous, carry out the following step:
Select the HP LaserJet P3005 in the Name list. The Printer Model and Model Name are selected
automatically.
NOTE If you are on a network that has more than one HP LaserJet P3005, print a
configuration page and match the Rendezvous Printer Name to the name on the list to
identify the device you are installing. (See
Print a configuration page on page 350.)
NOTE If the HP LaserJet P3005 does not appear in the list, verify that the device is
powered on and connected to the network. If it still does not appear, try turning the device
off and then on again. Finally, turn the computer off and then on again, then restart the setup
process. For more troubleshooting information, see
Troubleshooting the printer setup
on page 297.
ENWW Macintosh install and uninstall instructions 295
Macintosh