HP LaserJet P3005 - Software Technical Reference

8. Press (up) or (down) to select the number of copies to print.
9. Press
(select) to print the job.
Sometimes it is necessary to delete a print job from the device memory. You can do this from the device
control panel.
1. Press theMenu button to open the menus.
2. Press
(the up arrow) or (the down arrow) until RETRIEVE JOB is highlighted on the device
control panel, and then press
(select).
3. Press
(up) or (down) to scroll to your user name, and then press (select).
4. Press
(up) or (down) to scroll to the job name, and then press (select).
5. Press
(up) or (down) until DELETE is highlighted on the device control panel, and then press
(select).
6. Press
(select).
7. If a PIN number is assigned to the job, press
(up) or (down) to select the first digit of the PIN,
and then press
(select). The number in the device control-panel display changes to an asterisk.
Repeat this step for each of the remaining three digits of the PIN number.
If no PIN number is assigned to the job, continue with the next step.
8. Press
(select) to delete the job.
Collate
The Collate feature contains the following options:
●
On (turn off in application)
●
Off
Fit to Page
The Fit to Page feature contains the following options:
●
Prompt User for correct size (default)
●
Nearest Size and Scale
●
Nearest Size and Crop
●
Letter
●
A4
Print Quality
The Print Quality drop-down menu contains the following controls in the PS Emulation Unidriver:
●
1200 dpi
●
FastRes 1200
190 Chapter 4 HP traditional print drivers for MS Windows ENWW