HP LaserJet P2015 - Software Technical Reference

The name that appears in the Name text box depends on the following conditions:
●
If a saved custom media size has been selected from the drop-down menu on the Paper/
Quality tab, then the Name text box shows the name of the selected custom media size.
●
If a standard media size has been selected on the Paper/Quality tab, then the Name text box
shows the default name of "Custom."
●
If a new name has been typed into the Name text box for the purpose of saving a new size or
renaming an existing size, then that new name will remain in the text box until the new size is saved
or the dialog box is closed.
If you type a new name into the Name text box, but then do not click Save, you can change the width
and height values without losing the name. However, if you close the dialog box without clicking Save,
any unsaved name or size values are lost without warning.
Paper size
Change the width and height values by typing numeric strings into the edit boxes in the Paper Size
group box.
Any entry that is greater than the maximum limits of the width and height control is rounded down to the
maximum valid entry, while any entry that is smaller than the minimum limits of the width and height
control is rounded up to the minimum valid entry.
If units are in millimeters, the custom media-size range minimum is the limit rounded up to the nearest
whole millimeter. The custom media-size range maximum is the limit rounded down to the nearest whole
millimeter. Any non-numerical entry reverts to the last valid entry. Width and height entries are validated
when the focus has changed.
The resolution of each control is 1 millimeter or 1/10 of an inch, depending on the current measurement
units.
Units
To change measurement units, click one of the options in the Units group box (either Inches or
Millimeters).
Custom width and height control limits
The minimum media size for the HP LaserJet P2015 printer is 76.2 x 127 mm (3 x 5 inches) and the
maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes media size limits for
each media-handling device.
Table 4-2 PCL 6 custom media sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 76 mm (3.0 inches) 312 mm (12.28 inches)
Height 127 mm (5.0 inches) 470 mm (18.5 inches)
Tray 2 (250-sheet) Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.26 inches) 432 mm (17 inches)
Tray 3 (250-sheet, optional) Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.26 inches) 432 mm (17 inches)
156 Chapter 4 HP PCL 6, PCL 5, and PS emulation unidrivers for MS Windows ENWW