HP LaserJet P2015 - Software Technical Reference

Plug-and-play installation for a direct USB connection in Microsoft Windows Me
Up to five events might occur when you use Microsoft Windows Plug-and-Play to install the
HP LaserJet P2015 print driver software on a computer running Microsoft Windows Me.
NOTE: The SETUP.EXE program on the HP LaserJet P2015 printing-system CD is not supported in
Windows 98 SE, Windows Me, or Windows Server 2003. For these operating systems, use Microsoft
Plug-and-Play for direct USB connections or the add-printer-wizard installation for network connections
to install the print drivers. If you run SETUP.EXE in these operating systems, an error message
appears: The operating system on this computer is not supported.
Follow these steps to install the HP LaserJet P2015 printing-system software on a computer running
Microsoft Windows Me.
1. Verify that the HP LaserJet P2015 printer is turned on.
2. Quit all open programs.
3. Insert the HP LaserJet P2015 printing-system CD into the CD-ROM drive on the computer.
NOTE: If a dialog box that contains an Install button appears, click Exit and continue with step
4.
4. Connect a USB cable between the printer and the computer.
5. When the New Hardware Wizard dialog box appears, click Automatic search for a better driver.
(Recommended), and then click Next.
Figure 3-8 Add New Hardware Wizard Search for driver dialog box
90 Chapter 3 Install MS Windows printing-system components ENWW