HP LaserJet P3010 Series - Software Technical Reference

Table Of Contents
Supported operating systems for Windows
The HP LaserJet P3010 Series printer supports the following Windows operating systems:
Windows 2000 Service Pack 3 (32-bit)
Windows XP (32-bit and 64-bit)
Windows Server 2003 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows Server 2008 (32-bit and 64-bit)
Windows operating system requirements
Windows 2000 Service Pack 3: 333-MHz processor with 64 MB RAM
Windows XP: 333-MHz processor with 128 MB RAM
Windows Server 2003: 550-MHz processor with 128 MB RAM
Windows Vista: 800-MHz processor with 512 MB RAM
Windows Server 2008: 1-GHz processor (x86) or 1.4-GHz processor (x64) with 512 MB RAM
NOTE: All Windows operating systems also require a CD-ROM, DVD drive, or Internet connection to
install the HP LaserJet P3010 Series printing-system software, as well as either a dedicated universal
serial bus (USB 1.1 or 2.0) connectivity port or network connection to communicate with the printer.
NOTE: Windows 95, Windows 98, Windows Me, and Windows NT are not supported.
Install overview
The software for the HP LaserJet P3010 Series printer is installed from the printing-system software
CD. The Setup program installs the HP LaserJet P3010 Series printing-system software from the
printing-system software CD onto the hard disk and updates Windows files.
For all supported operating systems, each install option presents a series of screens that guide you
through the installation process.
Software installation types for Windows
The HP LaserJet P3010 Series printing-system software can be installed in the following ways:
HP Driver Installation Utility (HP DIU): Recommended, included on the printing-system software
CD and from downloaded drivers available at
www.hp.com/support/ljp3010.
Microsoft Add Printer Wizard
58 Chapter 3 Install Windows printing-system components ENWW
Installing Windows
printing-system
components