HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer - Software Technical Reference

If no paper handling devices are installed, the Output Devices screen will appear as shown in Figure
4-26 HP UtilityOutput Devices screen on page 136.
Figure 4-26 HP UtilityOutput Devices screen
Various options can be selected when an output device is installed. For example, the HP 500-Sheet
Stapler/Stacker options are listed below:
Click the Stapling Mode drop-down list to change the stapler/stacker stapling mode.
Click one of the Staple-out Mode options to change the product behavior when the staple
cartridge runs out of staples.
Duplex mode
For the HP LaserJet Enterprise 600, 601dn, 602dn, 603dn and HP LaserJet Enterprise 600, M602h,
M603xh product models, the Printer Settings section includes a Duplex Mode setting. Click this
setting to open the Duplex Mode screen.
Figure 4-27 HP UtilityDuplex Mode screen
136 Chapter 4 Mac OSX software and utilities ENWW