HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer - User Guide

5. Click Add to create the printer queue.

NOTE: For Mac OS X 10.5 and 10.6, the installation procedure should automatically configure

the installed options.

6. Print a page from any program to make sure that the software is correctly installed.

NOTE: If the installation failed, reinstall the software.

Install software for Mac computers on a wired network

Configure the IP address

1. Connect the network cable to the product and to the network.

2. Wait for 60 seconds before continuing. During this time, the network recognizes the product and

assigns an IP address or host name for the product.

At the product control panel, press the Home

button.

4. Open the following menus:

●

Administration

●

Reports

●

Configuration/Status Pages

●

Configuration Page

ENWW

Software for Mac