HP LaserJet MFP Multifunction Finisher - Administrator Guide

Control panel message Description Recommended action
13.12.41 - JAM IN LEFT ACCESSORY
13.12.42 - JAM IN LEFT ACCESSORY
13.12.43 - JAM IN LEFT ACCESSORY
A paper jam exists in the folding area. Check for jammed media in the input area
and the folding area of the device.
13.12.51 - JAM IN LEFT ACCESSORY
13.12.52 - JAM IN LEFT ACCESSORY
13.12.53 - JAM IN LEFT ACCESSORY
A paper jam exists in the booklet bin area. Check for jammed paper in the booklet bin
area and in the folding mechanism.
66.12.ZZ OUTPUT DEVICE FAILURE A failure has occurred with the device. Check cables and turn the product off and on
again. If an error message reappears, record
the message and call for support.
66.12.36 A failure has occurred because the device
was attached incorrectly.
Remove and reattach the device, being
careful not to hold the device by the stacker
tray. See Attach the HP Multifunction Finisher
on page 6
Table 3-2 Control-panel messages (continued)
ENWW Control-panel messages 27