HP LaserJet 9000 Series Printer - Getting Started Guide
Table Of Contents
- Printer Setup
- Contents
- Introduction
- Installation checklist
- Step 1 Prepare printer location
- Step 2 Check package contents
- Step 3 Locate printer parts
- Step 4 Remove internal packaging
- Step 5 Install accessories
- Step 6 Install print cartridge
- Step 7 Load Trays 2 and 3
- Step 8 Connect printer cables
- Step 9 Connect power cord
- Step 10 Change the control panel overlay
- Step 11 Configure the control panel display language
- Step 12 Print a configuration page
- Step 13 Install printing software
- Step 14 Verify printer setup
- Customer support options worldwide
- Warranty and regulatory information
- Declaration of Conformity
ENWW Prepare printer location 7
Printer weight (without print cartridge)
HP LaserJet 9000 printer: 63.5 kg (140 lb)
HP LaserJet 9000n printer: 69.4 kg (153 lb)
HP LaserJet 9000dn printer: 76.2 kg (168 lb)
HP LaserJet 9000hns printer: 76.2 kg (168 lb)
Location requirements for the printer
A level area on the floor
Space allowance around the
printer
A well-ventilated room
No exposure to direct sunlight
or chemicals, including
ammonia-based cleaning
solutions
Adequate power supply (15A,
110V or 220V circuit located
near the printer)
A stable environment—no
abrupt temperature or humidity
changes
Relative humidity 20 percent to
80 percent
Room temperature 50°F to 91°
F (10° C to 32.5° C)