HP LaserJet 8150 Series Printers - Software Technical Reference

PCL 6 and PCL 5e driver features
94
The resolution of each control is one tenth of an inch or one millimeter, depending on the
current measurement units. Clicking the up and down arrows increases or decreases the
current value by the increment amount (within the allowed range of values). The
computer determines the rate at which the values change.
Unit indicator labels change dynamically to indicate inches or millimeters, depending on
the measurement units the driver is currently using. To change measurement units, click
the Measurement Units button.
Custom width and height control limits
The minimum paper size for the HP LaserJet 8150 printer is 98mm by 191mm (3.87
inches by 7.5 inches) and the maximum is 297 mm by 450 mm (11.7 inches by 17.7
inches). The following table summarizes paper size limits for each paper-handling device.
Media Source or
Paper Handling
Accessory
Minimum Size -
Width by Height
Maximum Size -
Width by Height
Tray 1 (multi-
purpose)
98mm by 191mm
(3.87 inches by 7.5
inches)
297mm by 450mm
(11.7 inches by 17.7
inches)
Optional custom
media tray (Tray 3 or
Tray 5)
148mm by 210mm
(5.83 inches by 8.26
inches)
297mm by 432mm
(11.7 inches by 17.0
inches)
Icons
The paper and envelope icons visually define width and height.
Measurement Units button
Like the dynamic command button previously described, the Measurement Units button
is also multi-titled, although its function is always to toggle the unit of measurement
between standard (inches) and metric (millimeters) units of measurement.