HP LaserJet 8150 Series Printers - Software Technical Reference

Printer features

You can also send down the following PJL jobs to turn on or turn off the override mode:

To turn ON:

<ESC>%-12345X@PJL JOB

@PJL DEFAULT EDGETOEDGE=YES

<ESC>%-12345X@PJL EOJ

To turn OFF:

<ESC>%-12345X@PJL JOB

@PJL DEFAULT EDGETOEDGE=NO

<ESC>%-12345X@PJL EOJ

The HP LaserJet 8150 control panel settings should match the current PJL DEFAULT

value, if set.

Enabling Edge-to-Edge printing in the printer driver software

The following instructions allow you to access the Edge-to-Edge feature in the printer

driver preferences:

1. Open the Printers control panel.

2. Select the HP LaserJet 8150 PCL 6 driver and open the printer

preferences dialog.

3. Choose the Finishing tab.

4. In the Print Quality group, click on the Details button.

5. Click on the Edge to Edge printing checkbox to enable the feature.

Job Retention in RAM

The HP LaserJet 8100 printer introduced job retention features that required the use of

an EIO hard disk. A new feature of the HP LaserJet 8150, called Job Retention in RAM,

lets you use some job retention options without an installed EIO hard disk in the printer.

The proof and hold and private job options are available with the Job Retention in RAM

feature. Other options continue to require the installed EIO hard disk.

NOTE: The Job Retention in RAM feature is not supported

under Windows 3.1x.

For more information on the Job Retention feature, see “Destination Features”.