HP LaserJet 5200 Series Printer - User Guide

Using the embedded Web server
NOTE When the printer is directly connected to a computer, use the HP Easy Printer Care
software to view the printer status.
●
View printer control status information
●
Set the type of paper loaded in each tray
●
Determine the remaining life on all supplies and order new ones
●
View and change tray configurations
●
View and change the printer control panel menu configuration
●
View and print internal pages
●
Receive notification of printer and supplies events
●
View and change network configuration
● View support content that is specific to the current state of the printer
When the printer is connected to the network, the embedded Web server is automatically available.
You can open the embedded Web server from Windows 95 and later.
To use the embedded Web server, you must have Microsoft Internet Explorer 4 and later or
Netscape Navigator 4 and later. The embedded Web server works when the printer is connected to
an IP-based network. The embedded Web server does not support IPX-based or AppleTalk printer
connections. You do not need Internet access to open and use the embedded Web server.
Opening the embedded Web server
1. In a supported Web browser on your computer, type the IP address for the printer. To find the IP
address, print a configuration page. For more information about printing a configuration page,
see
Using printer information pages.
NOTE After you open the URL, you can bookmark it so that you can return to it quickly
in the future.
2. The embedded Web server has three tabs that contain settings and information about the
printer: the Information tab, the Settings tab, and the Networking tab. Click the tab that you
want to view.
3. See the following sections for more information about each tab.
ENWW Using the embedded Web server 99