HP LaserJet 5200 Series Printer - Software Technical Reference (External)

Use the Graphics Mode feature to select one of the following settings:
Send Graphics as Vector. Select this setting to send graphics to the device as a combination
of HP Graphics Language, version 2 (HP-GL/2), and raster images. This setting might produce
higher-quality output. It is the default setting.
Send Graphics as Raster. Select this setting to send all graphics to the device as images
composed of individual dots. This setting might improve printing speed in some cases.
Alternative Letterhead Mode
When selected, this option eliminates the need to flip or reload letterhead or preprinted paper in a
tray, whether you are printing on one or both sides of the sheet. Load the paper as you would for
printing on both sides. If the printer tray has an icon that indicates whether to load paper either
face-up or face-down, load the paper in opposite orientation of that shown.
When this option is selected, you must use one of the following options in the Type is setting:
Letterhead
Preprinted
NOTE Alternative Letterhead Mode is available only if the printer is equipped with an
automatic duplexing unit.
Layout Options
The Layout Options setting contains the Page Order setting.
Page Order specifies the order in which the pages of your document are printed. Front to Back prints
the document so that page 1 prints first. Back to Front prints the document so that page 1 prints last.
NOTE The page-ordering operation works on whole sheets of media rather than on individual
logical pages. Accordingly, if you set Pages per Sheet (on the Finishing tab) to be greater than
one, the ordering of logical pages on a physical sheet of media does not change.
206 Chapter 5 HP PCL 6, PCL 5, and PS emulation unidrivers for MS Windows ENWW
HP unidrivers for
Windows