HP Commercial LaserJet Printers and MFPs - Imaging and Printing Security Best Practices

Chapter 3 HP LaserJet and Color LaserJet MFP Security Checklist 41
Printer Firmware Update
HP recommends updating firmware whenever new firmware is available, but you should keep
Printer Firmware Update disabled until you plan to use it. To disable Printer Firmware Update:
1. Click to select Printer Firmware Update (Figure 36), and select Disable.
Figure 36: The Printer Firmware Update option.
Secure Disk Encryption Mode
The Secure Disk Encryption Mode option (Figure 37) determines whether encryption is
automatically enabled when an HP Secure Hard Disk is installed. Automatic is the default and
recommended mode.
Note:
If you are configuring multiple devices and are not sure whether a
manual password has been set on any of those devices it is
recommended you skip this step in the configuration.