HP LaserJet 4250/4350 Series - User Guide

To set the personality
1. Press M
ENU to open the menus.
2.
Press
(D OWN button) to highlight CONFIGURE DEVICE.
3.
Press
(S ELECT button) to select CONFIGURE DEVICE.
4.
Press
(D OWN button) to highlight SYSTEM SETUP.
5.
Press
(S ELECT button) to select SYSTEM SETUP.
6.
Press
(D OWN button) to highlight PERSONALITY.
7.
Press
(S ELECT button) to select PERSONALITY.
8.
Press
(U P button) or (D OWN button) to select the appropriate personality (AUTO, PS,
PCL, or PDF).
9.
Press
(S ELECT button) to set the personality.
10. Press M
ENU to exit the menu.
Clearable warnings
You can determine the display time for control-panel clearable warnings with this option by
selecting ON or JOB. The default value is JOB.
●
Select ON to show clearable warnings until you press
(S ELECT button).
● Select JOB to show clearable warnings until the end of the job in which they were
generated.
To set the clearable warnings
1. Press M
ENU to open the menus.
2.
Press
(D OWN button) to highlight CONFIGURE DEVICE.
3.
Press
(S ELECT button) to select CONFIGURE DEVICE.
4.
Press
(S ELECT button) to highlight SYSTEM SETUP.
5.
Press
(S ELECT button) to select SYSTEM SETUP.
6.
Press
(D OWN button) to highlight CLEARABLE WARNINGS.
7.
Press
(S ELECT button) to select CLEARABLE WARNINGS.
8.
Press
(U P button) or (D OWN button) to select the appropriate setting.
9.
Press
(S ELECT button) to set the selection.
10. Press M
ENU to exit the menu.
Auto continue
You can determine printer behavior when the system generates an Auto Continuable error.
ON is the default setting.
● Select ON if you want an error message to appear for ten seconds before the printer
automatically continues to print.
●
Select OFF to pause printing any time an error message appears and until you press
(S ELECT button).
ENWW Control panel 21