HP LaserJet 4250/4350 Series - User Guide

Configure Device menu

This menu contains administrative functions.

Printing submenu

Print Quality submenu

System Setup submenu

Stapler/stacker submenu

I/O submenu

Resets submenu

Printing submenu

Some items on this menu are available in the program or printer driver (if the appropriate

driver is installed). Program and printer driver settings override control-panel settings. In

general, it is better to change these settings in the printer driver, if applicable.

The section that follows lists the settings and possible values. In the Values column, the

default value for each setting is the one with an asterisk (*) next to it.

Item Values Explanation

COPIES

*1 to 32000 Sets the default number of copies by selecting

any number from 1 to 32000. Use

button ) or (D

OWN

button) to select the number

of copies, or use the numeric keypad, if

available, to specify the number of copies.

Use

ELECT

button) after specifying the

number of copies. The Setting saved message

appears.

This setting applies only to print jobs that do not

have the number of copies specified in the

program or printer driver, such as an MS-DOS,

UNIX, or Linux application.

NOTE

It is best to set the number of copies in the

program or printer driver. (Program and printer

driver settings override control-panel settings.)

ENWW Configure Device menu 213