HP PCL/PJL reference (PCL 5 Printer Language) - Technical Quick Reference Guide

18 EN

Rectangular Area Fill Graphics

Horizontal Rectangle Size (Decipoints or Dots)

Specifies the rectangular fill area width in decipoints or dots.

? * c # H -

Decipoints

# = Number of decipoints (1/720 inch)

? * c # A -

Dots

# = Number of dots (see Unit of Measure Command)

Vertical Rectangle Size (Decipoints or Dots)

Specifies the rectangular fill area height in decipoints or dots.

? * c # V -

Decipoints

# = Number of decipoints (1/720 inch)

? * c # B -

Dots

# = Number of dots (see Unit of Measure Command)

Set Pattern Reference Point

Sets pattern reference point to cursor position and will either keep pattern

fixed or rotate with print direction changes.

? * p # R

# = 0 - Rotate patterns with print direction

1 - Keep patterns fixed

Pattern (Area Fill) ID (Pattern ID)

Specifies the level of shading or type of cross-hatch to select via Fill

Rectangular Area command.

? * c # G

If Shading fill is selected: OR, if Cross-Hatch Pattern

fill is selected:

# = 1 thru 2 = 1-2% shade

3 thru 10 = 2-10% shade

11 thru 20 = 11-20% shade

21 thru 35 = 21-35% shade

36 thru 55 = 36-55% shade

56 thru 80 = 56-80% shade

81 thru 99 = 81-99% shade

100 = 100% shade

OR, if User-Defined Pattern

# = # of Pattern

Range = 0-32767

Learn.fm Page 18 Tuesday, June 22, 1999 8:17 AM