HP LaserJet 4250/4350 Series - User Guide

To set the printer default for PS Defer Media
1.
Press M
ENU to open the menus.
2.
Press
(D OWN button) to highlight CONFIGURE DEVICE.
3.
Press
(S ELECT button) to select CONFIGURE DEVICE.
4.
Press
(D OWN button) to highlight SYSTEM SETUP.
5.
Press
(S ELECT button) to select SYSTEM SETUP.
6.
Press
(D OWN button) to highlight TRAY BEHAVIOR.
7.
Press
(S ELECT button) to select TRAY BEHAVIOR.
8.
Press
(S ELECT button) to select PS DEFER MEDIA.
9.
Press
(U P button) or (D OWN button) to select ENABLED or DISABLED.
10.
Press
(S ELECT button) to set the behavior.
11. Press M
ENU to exit the menu.
To set Size/type prompt
1. Press M
ENU to open the menus.
2.
Press
(D OWN button) to highlight CONFIGURE DEVICE.
3.
Press
(S ELECT button) to select CONFIGURE DEVICE.
4.
Press
(D OWN button) to highlight SYSTEM SETUP.
5.
Press
(S ELECT button) to select SYSTEM SETUP.
6.
Press
(D OWN button) to highlight TRAY BEHAVIOR.
7.
Press
(S ELECT button) to select TRAY BEHAVIOR.
8.
Press
(S ELECT button) to select SIZE/TYPE PROMPT.
9.
Press
(U P button) or (D OWN button) to select DISPLAY or DO NOT DISPLAY.
10.
Press
(S ELECT button) to set the behavior.
11. Press M
ENU to exit the menu.
Sleep Delay
The adjustable Sleep Delay feature reduces power consumption when the printer has been
inactive for an extended period. You can set the length of time before the printer goes into
sleep mode to 1 MINUTE, 15 MINUTES, 30 MINUTES, or to 60 MINUTES, 90 MINUTES, 2
HOURS, or 4 HOURS. The default setting is 30 MINUTES.
NOTE
The printer control-panel display dims when the printer is in sleep mode. Sleep mode does
not affect printer warm-up time unless the printer was in sleep mode for more than 8 hours.
ENWW Control panel 19