HP LaserJet 4250/4350 Series - Software Technical Reference

NOTE You must use the same size of media for the entire print job. All Use Different Paper/
Covers options use the last Size is: setting that you select in any one of the Use Different
Paper/Covers options.
When you change the type and source of the media and covers, the settings you select
remain configured until you close the software program.
Back Cover
Use the Back Cover options to include a blank or preprinted back cover on a document, or to
include a back cover from a source tray that is different from the one used for the remainder of the
document.
The following illustration shows the Back Cover setting and options.
Figure 4-10 Back Cover setting
The following are the Back Cover options:
■ Size is: drop-down menu
■ Add a Blank or Preprinted Cover check box
■ Source is: drop-down menu
■ Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes that you make to
the Size is: setting here override any previous Size is: settings that you made in other Use Different
Paper/Covers options.
When you select Back Cover, you must also select the Add a Blank or Preprinted Cover check
box to enable the setting. When you select this check box, the Source is: and Type is: drop-down
menus become available and a check mark appears next to the Back Cover option.
194 4 HP PCL 6, HP PCL 5e, and HP PS 3 emulation unidrivers for Windows
HP unidrivers