HP LaserJet 4250/4350 Series - Software Technical Reference

Envelope Feeder
The two selections for this option are Installed and Not Installed. If your HP LaserJet 4250/4350
printer is equipped with an optional envelope feeder accessory the Installed option should be
selected.
Printer Hard Disk
When this option is enabled, the Stored Job option and the Mopier Mode are enabled in the print
driver. Use the Stored Job option to store print jobs and then print them later from the control panel.
The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated
copies from a single print job.
Mopier Mode
The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated
copies from a single print job. Multiple-original printing (mopying) increases performance and
reduces network traffic by transmitting the job to the product once, and then storing it on the hard
disk. The remainder of the copies are printed at the fastest speed. All documents that are printed in
mopier mode can be created, controlled, managed, and finished from the computer, which eliminates
the extra step of using a photocopier.
The HP LaserJet 4250/4350 printer supports the transmit-once mopying feature when the product
has an installed hard disk or a minimum total memory of 288 MB, and the Mopier Mode: setting on
the Device Settings tab is Enabled.
Job Storage
If your HP LaserJet 4250/4350 printer is equipped with a hard disk drive, the Job Storage option
should be enabled and all job storage options are available. If your HP LaserJet 4250/4350 printer is
not equipped with a hard disk drive but has a minimum of 80 MB of memory (for the 4250) or 96 MB
of memory (for the 4350), limited job-storage options are available. When job storage is enabled, the
product can store print jobs so that you can gain access to those print jobs later at the control panel.
Accessory Output Bin
The options for Accessory Output Bin are Not Installed, HP 500-Sheet Stacker, and HP 500-Sheet
Stapler/Stacker. If your HP LaserJet 4250/4350 printer is equipped with one of these accessories,
select the appropriate option.
Printer Memory
This option matches the setting to the amount of memory that is installed in the product. The driver
generates ranges of memory that can be selected, up to the maximum that the product can accept.
The driver can use this information to manage how the print driver uses the product memory.
When a minimum total memory of 80 MB (for the 4250) or 96 MB (for the 4350) is installed, the Job
Storage option and the Mopier Mode are enabled in the print driver. The Job Storage option allows
you to store print jobs, and then print them later from the control panel. The multiple-original print
(mopy) function is an HP-designed feature that produces multiple, collated copies from a single print
job.
HP Traditional Postscript 3 Emulation Driver features 171
HP traditional drivers