HP LaserJet 4200 and 4300 series printer - User Guide

ENWW Stapling documents 41

Loading staples

Load staples if the printer control panel display prompts you with a

STAPLER LOW ON STAPLES message (the stapler has fewer than 70

staples left) or a STAPLER OUT OF STAPLES message (the stapler is

empty). If the stapler runs out of staples, jobs continue to print to the

stapler/stacker, but they will not be stapled.

To load staples

1 On the right side of the stapler/stacker, turn the stapler unit toward

the front of the printer until the unit clicks into the open position.

Grasp the blue staple-cartridge handle and pull the cartridge out of

the stapler unit.

2 Insert the new staple cartridge into the stapler unit and rotate the

stapler unit toward the rear of the printer until the unit snaps into

place.