HP LaserJet 4200 and 4300 printers - Software Technical Reference Manual

Figure 32: Job Storage tab
When a hard disk is installed and Job Storage is enabled, the HP LaserJet 4200 and 4300 series printers offer the
following PS 3 emulation Job Storage options:
•
Off
•
Proof and Hold
•
Private Job
The Job Storage tab appears when Job Storage is enabled on the Device Settings tab. All of the options appear if a
hard disk is installed on the printer and enabled on the Device Settings tab.
Off
This option turns the Job Storage feature off (it is disabled), which means that the print job will not be stored in the
printer.
Proof and Hold
Use this option to store the print job on the printer hard disk and print only the first copy of the job. You can check the
first copy and, if the document is correct, you can print the remaining copies of the print job at the printer control panel.
The number of proof-and-hold print jobs that can be stored in the printer is set at the printer control panel.
Private Job and Stored Job
The Private Job and Stored Job options can be secured by using a four-digit personal identification number (PIN).
Software Technical Reference Driver features 87