HP LaserJet 4100 Series - User Guide

108 Chapter 4 - Problem solving
EN
5 Remove the rear output bin and
extension. To do this, bend the
middle down slightly, release tab 1
and then release tab 2.
6 Unlock the fuser by rotating the blue
fuser levers so that they point up.
7 Pull the fuser out of the printer. To
release the fuser from the printer,
hold the back of the printer while
pulling on the fuser. Do not pull on
the black plastic flapper.
8 Remove the paper that has jammed.
CAUTION
Do not use a sharp object to clear paper
from the fuser area. You might damage
the fuser.
Continued on the next page.
5
6
7
8
1
2