HP LaserJet 4100 series printers - Getting Started Guide

EN Step 14: Distribute software to network clients (optional) 1-31
English
Step 14: Distribute software to network clients
(optional)
Before a network client can print to the printer, the printing system
software must be installed on the client workstation. Rather than
distribute the contents of the CD to each client, you can place disk
images of the installation software onto a public directory. The
software’s Customization Utility allows you to copy disk images only
for Windows operating systems to a designated directory.
Creating disk images with the Installer’s
Customization Utility
1 Insert the CD into the CD drive.
Note If AutoPlay does not automatically begin the installer program, click
Start and then click Run. Type D:\Setup.exe at the prompt (this
assumes your CD drive is the D: drive).
2 When prompted to choose the method of installation, click
Customization Utility.
3 Select the language and operating system versions for which you
want to create disk images, and then choose the drivers you want
included in the disk images.
4 Assign a path to the drive and directory where you want to copy
the disk images.
5 Follow the instructions on the screen.