HP LaserJet 4100 series printers - Getting Started Guide

1-28 Getting Started EN
1 Single user: Log onto the computer that is connected to the
printer.
2 Network administrator: Depending on your environment, log
onto the network administrator workstation or onto the server with
supervisor or administrative privileges.
Follow the steps below to install your printer software.
Windows 95, Windows 98, Windows NT 4.0, and
Windows 2000
1 Close all running applications.
2 Insert the CD into the CD drive.
Note If your computer is not configured to automatically start the CD, click
Start, and then Run. Type D:\Setup.exe at the prompt and click OK.
3 Follow the instructions on the computer screen.
Windows 3.1x
Install both drivers and fonts from your CD.
1 Close all running applications.
2 Insert the CD into the CD drive.
3 From the Program Manager, select Main, select Control Panel,
select Printers, and then select Install.
4 Follow the instructions on the screen to add a printer.
5 To install fonts, locate the appropriate font installer on the CD for
your system and run it.
Note For latest or additional drivers, go to http://www.hp.com/support/lj4100
on the World Wide Web.