HP LaserJet 4100 series printers - Getting Started Guide

EN Step 11: Connect printer cables 1-25
English
Connecting a parallel cable
Use the parallel port when directly
connecting the printer to a personal
computer.
CAUTION
Make sure the printer is turned off before
connecting the parallel cable.
Note
To ensure reliability, use an IEEE-1284
compliant parallel cable (these cables
are clearly marked with “IEEE-1284”).
Only IEEE-1284 cables support all of the
printer’s advanced features.
1 Connect the parallel cable to the
parallel port on the printer.
2 Snap the wire clips in place to
secure the cable to the printer.
The cable should install easily. If
installation is difficult, check the
cable orientation.
3 Connect the other end of the cable
to the parallel port on the computer.
1
2