HP LaserJet 4050 and 4050N Printers - Getting Started Guide

18 Getting Started Guide
EN
Step 8. Attach Power Cord
1
Locate the power switch on the right
side of the printer. Make sure the
printer is switched off.
2
Connect the power cord to the printer
and a grounded power strip or an AC
outlet.
Note
Only use the power cord that came with
the printer.
3
Switch the printer on.
4
After the printer warms up, the
READY
message should be visible on the
control panel display and the Ready
light will remain on. If the
READY
message does not appear, go to the
problem-solving chapter in the printer
online user’s guide.
Ready
Data
Menu
Item
Go
READY