HP LaserJet 4050T and 4050TN Printers - Getting Started Guide

EN
Getting Started Guide 13
Step 6. Install Toner Cartridge
1
Remove the toner cartridge from its
packaging (save packaging for
possible cartridge storage). Open the
printer by lifting the top cover.
2
Rotate the cartridge and gently shake
it from side to side to distribute the
toner evenly inside the cartridge.
3
Locate the sealing tape tab on the end
of the cartridge. Carefully bend the tab
back and forth until it separates from
the cartridge.
4
Firmly pull the tab straight out from the
cartridge to remove the entire length of
tape (22 in, or 56 cm). Avoid touching
any black toner on the tape.
Note
If the tab separates from the tape, grasp
the tape and pull it out of the cartridge.
Continued on the next page.