HP LaserJet 4000 T and 4000 TN Printers - Getting Started Guide

20 Getting Started Guide
EN
Connecting to Ethernet 10Base-T Network
Use the RJ-45 port to connect the printer to an Ethernet 10-Base-T
network.
Caution
Make sure the printer is turned off before connecting to the RJ-45
port.
• Connect a twisted-pair network cable to the RJ-45 port on the
HP JetDirect 600N print server card.
• Connect the other end of the cable to the network.
Note
The 10Base-T port is the default port on the HP JetDirect 600N print
server card.
Note
The HP JetDirect 600N print server card supports one Ethernet
cabling connection at a time.