HP LaserJet 2300 printer - HP Driver Preconfiguration Support Guide

22 HP Driver Preconfiguration Support Guide
Figure 7 Configurable drivers
2 Make the configuration selection.
This page lists the selected drivers that support preconfiguration. Depending on the drivers
that are selected for installation, some might not support preconfiguration (specifically,
Windows NT 4.0 and Windows 95, Windows 98, and Windows Me PostScript [PS] drivers).
The user is offered either two or three configuration options. If the Driver Configuration
Plugin has been used for the same product previously, and the configuration that was
created as part of that workflow was saved, then the user will have the following options:
• Yes - Create a New Configuration
• Yes - Use an Existing Configuration (this option appears only if a configuration has
been saved previously)
• No - Continue Creating Print Queue (select this option to skip driver configuration)
3 If existing configurations are available for the product that is being installed and the user
selects the Use an Existing Configuration setting, the dialog box shown in Figure 8
appears.
When the user selects an existing configuration, the appropriate configuration file is loaded
into the Configuration Editor pages (as shown in Figure 9 and Figure 10), just as a new
configuration would be. This allows changes to be made to that configuration, but does not
require them.