HP PCL/PJL reference (PCL 5 Color) - Technical Reference Manual

EN Index-1
Index
A
adaptive compression
block size 6-28, 6-31
compression methods 6-29
control bytes 6-29
cursor position 6-31
data block 6-28
delta row 6-29, 6-31
duplicate row 6-29, 6-30, 6-31
empty row 6-29, 6-30, 6-31
format 6-29
operation hints 6-31
row length 6-31
run-length encoded 6-29, 6-31
seed row 6-31
TIFF 6-29, 6-31
y-offset 6-31
area fill ID command
See also pattern ID command 5-29
area fill, user-defined patterns 5-33
assign color index command 3-20, C-21
B
base pattern 5-33
black and white references A-4
black rule 5-32
black-and-white mode 2-1, B-2
block size, adaptive compression 6-28
byte counts 6-34
C
chapter summary iv
CIE L*a*b* color space B-18
clipping raster area 6-13
coding efficiency, raster compression
6-23
color
concepts A-3
device-dependent A-2, A-4, A-10
device-independent A-2, A-4, A-10
foreground 3-17, C-18
lookup tables A-12, D-13
map 4-4, D-22
matching A-11
modes A-7
modifying output 4-1, D-1
processing documents A-14
raster vs. non-raster A-3, A-14
selection A-5
color appearance matching A-12
color component one command 3-19,
C-20
color component three command 3-20,
C-21
color component two command 3-19,
C-20
color lookup tables A-2
color lookup tables command D-13
color management 1-4
color modes
black-and-white mode 2-1, B-2
HP-GL/2 imaging mode 2-2, 2-13, B-3,
B-28
PCL imaging mode 2-2, 2-5, B-2, B-6
simple color mode 2-1, 2-3, B-2, B-4
color print model
command sequence 5-6
logical operations and transparency
5-12
rectangular area fills 5-45
color printing overview 1-1, A-1
color range (CR) command 7-19
color selection and palettes 1-6
color spaces 1-3
color specifications 1-3
color vector graphics (HP-GL/2) 7-1
Colorimetric RGB color space B-20
command
finish mode 4-6
logical operation 5-13
pixel placement 5-27
commands, PCL
?*c#G - Pattern (Area Fill) ID 5-29
End Raster Graphics 6-35
pattern control 5-44
pattern ID 5-29
pattern transparency mode 5-8
raster graphics presentation 6-10
raster graphics resolution 6-8
raster graphics, start 6-17
Raster Height command 6-13
Raster Width command 6-15
raster y offset 6-19
Select Current Pattern command 5-32
Set Pattern Reference Point 5-43
Set Raster Compression Method 6-20
Source Transparency Mode 5-7