HP PCL/PJL reference - Printer Job Language Technical Reference Manual

6-18 Environment Commands EN
JOBNAME Assigns a job name to a “Proof and
Hold” job. This is different than the
NAME variable associated with the JOB
command.
“jobname string”
JOBOFFSET Sets the default job offset state. ON, OFF
LANG Sets the default display language for the
display panel and unsolicited status
feedback display panel messages.
ENGLISH,
FRENCH,
GERMAN,
ITALIAN,
SPANISH,
SWEDISH,
CHINESE,
JAPANESE,
TURKISH,
POLISH,
NORWEGIAN,
and others (see
Appendix A)
LOWTONER Returns configuration for low-toner
messages. If ON or CONTINUE, printer
remains online when the LOW TONER
message is displayed; if OFF or STOP,
printer goes offline and waits until On
Line or Continue key is pressed.
ON, OFF, STOP,
CONTINUE
MANUALFEED Manual feed mode. ON, OFF
MARGINS Sets the margins for the plot. The
SMALLER and EXTENDED values are
used only with roll-feed plotters to
reduce the amount of waste media
between plots.
NORMAL,
SMALLER,
EXTENDED
MEDIASOURCE Specifies the media source to be used
for the next job for devices that allow a
sheet of paper to be used without
removing the loaded roll of paper.
TRAY1, TRAY2,
TRAY3
MEDIATYPE Sets the default media type for the
current PJL job.
PAPER, SPECIAL,
TRANSPARENCY,
GLOSSY
MIRROR Horizontal reflection of plots. ON, OFF
General PJL Environment Variables (continued)
Variable Description
Sample Value
Range